EtherWAN EasyLink-PRO-US-MP-04, 2400 Mbps Preconfigured Multipoint IP67 Wireless Bridge Kit

The EasyLink Pro MP series is a high-speed pre-configured Point to Multipoint Bridge kit that allows for connecting up to 6 sets of remote locations wirelessly up to 1.5 mile away. EasyLink Pro MP's simple setup allows you to connect locations by mounting the hardware, powering them on, and aligning the units using the built-in alignment LEDs. Each kit contains one central bridge unit plus two/four/six auxiliary units that connect automatically using a highly secure, unique, and hidden SSID and randomly generated passphrase to keep the equipment secure right out of the box. There is no need for any setup software, just mount, power, and align using the built in alignment LEDs, and you are connected.

Highlights

• Only Available in North America
• Up to 2400Mbps data rate for multiple video connections
• Plug & Play design - simply power up and align units w/ built in alignment LEDs
• Connect up to 6 remote locations
• Kit includes all accessories needed for powering up and mounting
• Highly secure with encrypted and authenticated wireless connection (WPA2)
• Hardened-grade and NEMA-TS2 compliant for outdoor and harsh environments

Features

• Easy: Mount units to a pole or wall using included mount kit; Signal strength LEDs for easy alignment; Just power and align using supplied PoE injectors and power supplies; No technical expertise or configuration needed
• Highly Secure: Encrypted & Authenticated Wireless Connection (WPA3); Every kit has unique SSID and security settings; Management Frame Protection (MFP) enabled
• Hardened-Grade for Outdoor & Harsh Environments: Fanless and ruggedized outdoor IP67 enclosure (Rainproof); Wide operating temperature range (-40 to 167F); Connections up to 2 miles away
• What's Included: Base unit and 2, 4, or 6 auxiliary units preconfigured to connect upon power-up; Wall and pole mounting kits; PoEPowerEZ Active PoE to Passive PoE Converters for Base and Auxiliary Units

Specifications

• Wireless Frequency: 5 GHz
• Wireless Max data rate: 2400 Mbit/s
• Wireless Number of chains: 2 per unit
• Wireless Standards: 802.11a/n/AC/ax
• Wireless Security: WPA3 Passphrase, 256-bit AES-CCM Encryption, Dynamic Frequency selection
• Layer 2 Features: Auto-negotiation for port speed and duplex
• Redundant Protocols (always enabled): IEEE 802.1D STP, IEEE 802.1w RSTP, IEEE 802.1s MSTP
• Interface Ethernet: Primary Node 10/100/1000BASE-T Passive PoE; Auxiliary Node 10/100/1000BASE-T
• Interface Wireless: 802.11a/n/AC/ax
• Technology Standards: IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-T, IEEE 802.3ab 1000BASE-T, IEEE 802.3x full duplex and flow control, IEEE 802.1D STP, IEEE 802.1s MSTP, IEEE 802.1w RSTP, IEEE 802.11w Management Frame Protection (MFP)
• Power: PoE in (Passive PoE), PoE in input Voltage 18-28V, Max power consumption 15W
• Physical Primary Node Dimensions: 270 x 565 x 76mm (W x H x D) / 10.63 in x 22.25 in x 3 in
• Physical Primary Node Weight (shipping): 6.2lbs (2.81kg)
• Physical Primary Node Installation Type: Pole/Wall
• Physical Primary Node Casing Material: UV Protected Polystyrene case
• Physical Auxiliary Node Dimensions: 185 x 185 x 63.5mm (W x H x D) / 7.28 in x 7.28 in x 2.5 in
• Physical Auxiliary Node Weight (shipping): 2 units per box 7.15lbs (3.25kg)
• Physical Auxiliary Node Installation Type: Pole/Wall
• Physical Auxiliary Node Casing Material: UV Protected Polystyrene case
• Environmental Operating Temp.: -40 to 75 C (-40 to 167 F)
• Environmental Storage Temp.: -45 to 85 C (-49 to 185 F)
• Environmental Relative Humidity: 5% to 95% (non-condensing)
• Environmental Wind Survivability: 200km/h
• Regulatory ISO: Manufactured in ISO-9001 facility
• Regulatory EMI: FCC Part 15B Class A, FCC Part 15C
• Environmental Test Compliance: IEC 60068-2-6 Fc (Vibration Resistance), EN 61000-4-3 (Radiated RFI)
• Warranty Length: 3 years
• MPN: EASYLINK-PRO-US-MP-02 (1816315), EASYLINK-PRO-US-MP-04 (1816324), EASYLINK-PRO-US-MP-06 (1816326)
• Auxiliary Node Antenna Frequency Range: 5-5.9 GHz
• Auxiliary Node Antenna Gain: 13dBi typ.
• Auxiliary Node Antenna Polarization: Dual linear-V & H
• Auxiliary Node Antenna Beamwidth Horizontal: 37 deg @ -3dB
• Auxiliary Node Antenna Beamwidth Vertical: 37 deg @ -3dB
• Auxiliary Node Antenna VSWR: <2.0 typ.
• Auxiliary Node Antenna Impedance: 50 Ohm
• Auxiliary Node Antenna RF Interface: 2 x SMA Female
• Auxiliary Node Antenna Front-to-Back Ratio: >20dB
• Auxiliary Node Antenna Port-to-Port Isolation: >30dB
• Primary Node Antenna VSWR: 2.5:1 Max, <2
• Primary Node Antenna Polarization: Linear & Vertical, Vertical & Horizontal
• Primary Node Antenna Gain: 8 dBi Vertical, 7 dBi Horizontal
• Primary Node Antenna Frequency range: 5150 - 5875 MHz, 4.9 - 5.9 GHz Vertical, 5 - 5.9 GHz Horizontal
• Primary Node Antenna Beam width: Horizontal 360 deg, Vertical 18 deg
• Primary Node Antenna Impedance: 50 Ohm
• Primary Node Antenna Temperature: -40 C to +85 C
• Primary Node Antenna Humidity: 90% @ 25 C
• Ordering Model EasyLink-PRO-US-MP-02: 2 paired Wireless Bridge Clients and 1 Wireless Bridge Base unit, 3 x 24VDC, 1.5A Power Supplies, 3 x Passive PoE Injectors, 3 x PoEPowerEZ and 3 x Mounting kits
• Ordering Model EasyLink-PRO-US-MP-04: 4 paired Wireless Bridge Clients and 1 Wireless Bridge Base unit, 5 x 24VDC, 1.5A Power Supplies, 5 x Passive PoE Injectors, 5 x PoEPowerEZ and 5 x Mounting kits
• Ordering Model EasyLink-PRO-US-MP-06: 6 paired Wireless Bridge Clients and 1 Wireless Bridge Base unit, 7 x 24VDC, 1.5A Power Supplies, 7 x Passive PoE Injectors, 7 x PoEPowerEZ and 7 x Mounting kits
• Ordering Accessory JPole18: 18 in Wall Mount J-Pole
• Ordering Accessory Cable 3: 3ft Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
• Ordering Accessory Cable 25: 25ft Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
• Ordering Accessory Cable 50: 50ft Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
• Ordering Accessory Cable 150: 150ft Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
• Ordering Accessory Cable 300: 330ft Shielded Twisted Pair CAT 6 Cable with UV Resistant Coating
• Ordering Accessory EPOW-24-60-A: Hardened Power Supply rated for use in temperatures -40 to 167 F