| Frequency response (-10 dB) |
44 Hz - 18 kHz |
| Rated noise power / voltage1 |
625 watts / 65 volts rms |
| Broadband sensitivity2 |
96 dB SPL |
| Coverage angle |
75? conical DMT |
| Directivity factor (Q) |
8.3 |
| Directivity index (DI) |
9.2 |
| Recommended crossover |
950 Hz, 48 dB/octave |
| Maximum SPL at 1 m (passive) |
123 dB continuous3
129 dB peak4 |
| Rated impedance |
8? |
| HF transducer |
76 mm (3-inch) voice coil, compression driver;
72 W / 24 V (2 hours) |
| LF transducer |
381 mm (15-inch) driver with 102 mm (4-inch) voice coil;
525 W / 65 V (2 hours) |
| Optional accessories |
M10 Kit-W |
| Enclosure details |
|
| Input connector |
Covered barrier strip, NL4 connector |
| Enclosure material |
15-ply Baltic birch plywood |
| Attachment points |
Fifteen M10 threaded inserts |
| Color |
Black (RAL 9011), White (RAL 9010) |
| Grille |
16-gauge powder coated steel |
| Dimensions (HWD) inches |
32 × 17.5 × 15.2 |
| Dimensions (HWD) mm |
813 x 445 x 386 |
| Net weight |
36.2 kg (80 lb) |
1 Two hour rating using IEC60268 noise based on minimum impedance
2 Mid-band based on nominal impedance; 2.83 V at 1 m
3 Calculated as the nominal sensitivity plus 10× the log of continuous rated power in volts squared divided by nominal impedance
4 Calculated as the continuous calculated max output plus 6 dB |
