{"product_id":"rcf-ips-2-5k","title":"RCF IPS 2.5K, Class H Power Amplifier (2 X 1,250 W @ 4 Ω)","description":"\u003cp\u003e\u003cstrong\u003eIPS 2.5K Two Channels Professional Power Amplifier\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIPS Series is a range of two channel professional amplifiers that combine the latest high-performing class-H power amplification technology with long-term reliability. IPS 2.5K is a 2-channel power amplifier that delivers up to 2 x 1250 Watts at 4 Ohms impedance. It features independent gain control, signal\/clip and fault indicators, stereo XLR input and output link, stereo\/parallel\/bridge switch, speakON, and binding post output connectors. Moreover, it is protected against short circuits. Thanks to its high-efficiency heat sinks and variable speed fans, IPS 2.5K can withstand extreme heat conditions, ensuring complete reliability.\u003c\/p\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2 x 1250 W Class-H Power\u003c\/li\u003e\n\u003cli\u003eFast response and low distortion\u003c\/li\u003e\n\u003cli\u003eStereo, parallel, bridge modes\u003c\/li\u003e\n\u003cli\u003eExtensive protection circuit\u003c\/li\u003e\n\u003cli\u003eVariable speed cooling system\u003c\/li\u003e\n\u003cli\u003eSignal, clip, fault led indicators\u003c\/li\u003e\n\u003cli\u003eXLR input connectors\u003c\/li\u003e\n\u003cli\u003espeakON and binding post output connectors\u003c\/li\u003e\n\u003cli\u003eLimiter on each channel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eEnergize your Sound\u003c\/h4\u003e\u003cp\u003eIPS are high-performance, versatile 2U power amplifiers for install applications, using sophisticated Class-H topology for two single-channel outputs, two parallel outputs, or a single-channel bridge operativity. High quality, low distortion audio output, flawless reliability and safety, industry-standard speakON connectors, and binding post terminals make IPS Series electronics the workhorse solution for mobile sound systems and permanent installation applications.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eExtensive protection circuits\u003c\/strong\u003e\u003c\/p\u003e\u003ch4\u003eThe Advantage of Class H\u003c\/h4\u003e\u003cp\u003eClass-H amplifiers modulate the supply voltage to the amplifier output devices so that it is never higher than necessary to support the signal swing. This reduces dissipation across the output devices connected to that supply and allows the amplifier to operate with an optimized efficiency, regardless of output power level. Up to full power, a Class-H design will require less energy than a pure class AB design, and is better suited for high-power applications.\u003c\/p\u003e\u003ch4\u003eRemarkable Audio Performance\u003c\/h4\u003e\u003cp\u003eWith a very high signal-to-noise ratio, IPS amplifiers also boast a very low total harmonic distortion, making it perfect for highly demanding music applications hence delivering perfect vocal intelligibility.\u003c\/p\u003e\u003ch4\u003e1 CH B OUTPUT\u003c\/h4\u003e\u003cp\u003eChannel B output to loudspeakers (SPEAKON and BINDING POST connectors). Do not use this output if the amplifier is set to BRIDGE mode. See both ‘Operation modes’ and ‘SPEAKON connector wiring’ manual sections.\u003c\/p\u003e\u003ch4\u003e2 CH A OUTPUT\u003c\/h4\u003e\u003cp\u003eChannel A output to loudspeakers (SPEAKON and BINDING POST connectors). If the amplifier is set to BRIDGE mode, only connect this output. See both ‘Operation modes’ and ‘SPEAKON connector wiring’ manual sections.\u003c\/p\u003e\u003ch4\u003e3 CH A INPUT\u003c\/h4\u003e\u003cp\u003eChannel A balanced audio input (female XLR connector).\u003c\/p\u003e\u003ch4\u003e4 CH A LINK\u003c\/h4\u003e\u003cp\u003eChannel A balanced parallel audio output (male XLR connector). This output is linked in parallel with the channel A input and is useful to link another amplifier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e5 SENSITIVITY\u003c\/strong\u003e\u003c\/p\u003e\u003ch4\u003eswitch\u003c\/h4\u003e\u003cp\u003eSet the sensitivity switch to either 0.775 V or 1.4 V, which is input signal voltage required to get the maximum power output from the amplifier.\u003c\/p\u003e\u003ch4\u003e6 CH B INPUT (STEREO MODE ONLY)\u003c\/h4\u003e\u003cp\u003eChannel B balanced audio input (female XLR connector).\u003c\/p\u003e\u003ch4\u003e7 CH B LINK\u003c\/h4\u003e\u003cp\u003eChannel B balanced parallel audio output (male XLR connector). This output is linked in parallel with the channel B input and is useful to link another amplifier.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e8 MODE\u003c\/strong\u003e\u003c\/p\u003e\u003ch4\u003eswitch\u003c\/h4\u003e\u003cp\u003eBefore turning the amplifier on, set the amplifier mode selector to the right position among BRIDGE, PARALLEL (mono) and STEREO. See the ‘Operation modes’ manual section.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003e9 RESET\u003c\/strong\u003e\u003c\/p\u003e\u003ch4\u003ebutton\u003c\/h4\u003e\u003cp\u003ePush this button to reset the amplifier when is muted due to the thermal protection.\u003c\/p\u003e\u003ch4\u003eSelf-protecting Architecture\u003c\/h4\u003e\u003cp\u003eIPS Amplifiers implement several safety strategies protecting both the amplifier and the sound system, including an effective peak limiting protection for the transducers. The temperature-controlled continuous variable speed double-fan system (front to back), combined with the high-efficiency heat sinks, allows the amplifier to maintain the optimal working temperature, no matter the environmental temperature or the power output. The circuit is protected from overheating and short circuits, also including protections against infrasonic DC and Very High Frequency (VHF) peaks from non-musical signals that could damage transducers.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003ch4\u003eAmplifier specifications\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplifier Class\u003c\/td\u003e\n\u003ctd\u003eH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Power\u003c\/td\u003e\n\u003ctd\u003e2 x 1250 W @ 4 ohm 2 x 800 W @ 8 ohm 1 x 2500 W @ 8 ohm (bridge)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (-3dB)\u003c\/td\u003e\n\u003ctd\u003e20 Hz - 22000 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCrosstalk\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;80 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDistortion (THD+N) @ 1 kHz nominal power\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.01 %\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch4\u003eInput section\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal number of inputs\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBalanced\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMono\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLine inputs\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch4\u003eOutput section\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal output number\u003c\/td\u003e\n\u003ctd\u003e2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSignal output connectors\u003c\/td\u003e\n\u003ctd\u003eXLR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower output connectors\u003c\/td\u003e\n\u003ctd\u003eBinding Post, Speakon\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch4\u003eConfiguration and control\u003c\/h4\u003e\u003ctable\u003e\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003eDIP switch, Front panel\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch4\u003eProtections\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eCooling\u003c\/td\u003e\n\u003ctd\u003eForced\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShort circuit\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThermal\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDC\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFuses\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVHF (Very High Frequencies)\u003c\/td\u003e\n\u003ctd\u003eYes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch4\u003ePower requirement\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating voltage\u003c\/td\u003e\n\u003ctd\u003e220-240\/115 V~ 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower consumption (MAX)\u003c\/td\u003e\n\u003ctd\u003e900 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch4\u003eStandard compliance\u003c\/h4\u003e\u003ctable\u003e\u003ctr\u003e\n\u003ctd\u003eSafety agency\u003c\/td\u003e\n\u003ctd\u003eCE compliant\u003c\/td\u003e\n\u003c\/tr\u003e\u003c\/table\u003e\u003ch4\u003ePhysical specifications\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eCabinet\/Case Material\u003c\/td\u003e\n\u003ctd\u003eMetal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColor\u003c\/td\u003e\n\u003ctd\u003eBlack - RAL 9005\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRack mounting\u003c\/td\u003e\n\u003ctd\u003e19\", 2U\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch4\u003eSize \/ Weight\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e88 mm \/ 3.46 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e482 mm \/ 18.98 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e325 mm \/ 12.8 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e18.8 kg \/ 41.45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003ch4\u003eShipping information\u003c\/h4\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Height\u003c\/td\u003e\n\u003ctd\u003e140 mm \/ 5.51 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Width\u003c\/td\u003e\n\u003ctd\u003e550 mm \/ 21.65 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Depth\u003c\/td\u003e\n\u003ctd\u003e530 mm \/ 20.87 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackage Weight\u003c\/td\u003e\n\u003ctd\u003e20.6 kg \/ 45.42 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"RCF","offers":[{"title":"Default Title","offer_id":50530257502405,"sku":"IPS 2.5K","price":1579.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0603\/0612\/9093\/files\/2ca1e1df-1196-74c1-009a-85bb82a6e16c.png?v=1790228197","url":"https:\/\/www.prodj.com\/products\/rcf-ips-2-5k","provider":"ProDJ","version":"1.0","type":"link"}