Home • Brands • Lowell • Lowell SR-2518

Lowell SR-2518

Product Description


SR-2518: Swing Rack 25U x 18?D


Cost-effective solution for 19 inch network, communications and security equipment housed in secure areas. Swing open for full access to mounted equipment and wiring.

SPECIFICATIONS Rack Space: 25U Height: 49.24 in. Width: 19.75 in. Depth: 18.00 in. (17.88 usable) FEATURES Heavy gauge steel construction Front gate swings open 90 degrees (left or right) Quick release detent pins secure frame closed Mounting holes on 16 in. centers Open sides and multiple tie loop points for cable routing One pair fixed position rails tapped 10-32 Black semi-gloss powder epoxy finish Load Capacity: 100 lbs. Ships unassembled COMPLIANCE & CERTIFICATION EIA/TIA compliant RoHS compliant Certified U.S. steel Made in Missouri, U.S.A. A&E SPECIFICATIONS The 19” swing gate wall rack shall be Lowell Model SR-2518, which shall measure 49.24"H x 19.75"W x 18.00"D. It shall be constructed of heavy gauge certified U.S. steel with black semi-gloss powder epoxy finish. The front frame shall swing open 90 degrees (left or right orientation) to allow access to the rear of mounted equipment. The rack shall feature 25 rack units of panel space, quick release detent pins to secure the frame closed, tie loop points, and one pair of fixed position mounting rails tapped 10-32 on E.I.A. spacing. Load capacity shall be 100 lbs.

Cost-effective solution for 19 inch network, communications and security equipment housed in secure areas. Swing open for full access to mounted equipment and wiring.

SPECIFICATIONS

Rack Space: 25U
Height: 49.24 in.
Width: 19.75 in.
Depth: 18.00 in. (17.88 usable)

FEATURES

Heavy gauge steel construction
Front gate swings open 90 degrees (left or right)
Quick release detent pins secure frame closed
Mounting holes on 16 in. centers
Open sides and multiple tie loop points for cable routing
One pair fixed position rails tapped 10-32
Black semi-gloss powder epoxy finish
Load Capacity: 100 lbs.
Ships unassembled

COMPLIANCE & CERTIFICATION

EIA/TIA compliant
RoHS compliant
Certified U.S. steel
Made in Missouri, U.S.A.

A&E SPECIFICATIONS

The 19” swing gate wall rack shall be Lowell Model SR-2518, which shall measure 49.24"H x 19.75"W x 18.00"D. It shall be constructed of heavy gauge certified U.S. steel with black semi-gloss powder epoxy finish. The front frame shall swing open 90 degrees (left or right orientation) to allow access to the rear of mounted equipment. The rack shall feature 25 rack units of panel space, quick release detent pins to secure the frame closed, tie loop points, and one pair of fixed position mounting rails tapped 10-32 on E.I.A. spacing. Load capacity shall be 100 lbs.