JBL AW266 High Output 12" 2-way Full-Range Loudspeaker-GRAY
High Power 2-Way All Weather Loudspeaker with 1 x 12" LF The AW266 is a high power, lightweight, 2-way, full-range loudspeaker system comprised of the JBL Differential Drive dual voice coil and dual magnetic gap 2262H 300 mm (12 in) low-frequency driver and 2432H high-frequency 38 mm (1.5 in) exit, 75 mm (3 in) voice-coil compression driver. The large format Progressive Transition wave-guide provides excellent 60° x 60° coverage. The loudspeaker system can used in either the vertical or horizontal orientation. The enclosure is constructed of multilayer glass composite and is heavily braced to maximize lowfrequency performance. The 14-gauge stainless steel grille, backed with open cell foam and stainless steel mesh, provides excellent protection in the harshest environments. The system is equipped with a 400 W 70/100V transformer. A heavy-duty stainless steel U-type mounting bracket is included and allows for easy installation on flat surfaces or in 90° corners. The AW266 is part of JBL’s AE Series, a versatile family of loudspeakers intended for a wide variety of applications.
Weather-Resistant, All Fiberglass Enclosure
60° x 60° Coverage
2262H Differential Driver® Low- Frequency Driver
2432H High Frequency Compression Driver
Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion
Available in Gray and Black finish
400 W, 70/100V Transformer Included
U-type Mounting Bracket Included
Frequency Range (-10 dB) 40 Hz – 20 kHz
Frequency Response (±3 dB) 51 Hz – 18 kHz
Coverage Pattern 60° x 60° waveguide
Directivity Factor (Q) 15.8
Directivity Index (DI) 12 dB
Crossover Frequency 1.1 kHz
Long-Term System Power Rating (IEC) 500 W (2000 W peak) 100 hrs
Maximum SPL 126 dB SPL (132 dB peak)
System Sensitivity (1W @ 1m) 98 dB
70V/100V Transformer Taps 70V: 400 W, 200 W, 100W 100V: 400W, 200W
Low Frequency Driver 1 x JBL 2262H 300 mm (12 in) Differential Drive® driver with 75 mm (3 in) dual voice coil
LFD Nominal Impedance 8 ohms
LFD Sensitivity (1W @ 1m, within operational band) 96 dB SPL
High Frequency Driver JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
HFD Nominal Impedance 8 ohms
HFD Sensitivity (1W @ 1m) 113 dB SPL
Enclosure Hand-Laminated Fiberglass, gray gelcoat (black available)
Suspension Attachment: 2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization, 1 x M10 on rear for safety.
Grille Three layer grille assemblies consisting of 16-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh.
Input Connector CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs.
Environmental Specifications: IP56 per IEC 529
Dimensions (H x W x D in 409 x 732 x 452 mm horizontal cabinet orientation) (16.1 x 28.8 x 17.8 in)
Net Weight 25.2 kg (55.5 lb)