YORKVILLE EP2152 Processor with XLR Connectors

YORKVILLE EP2152 Processor with XLR Connectors
Every élite enclosure can be used with an optional, dedicated stereo processor which is designed to optimize the performance of that specific cabinet. The 19" rack-mountable processors interface between the output of the mixer and the input of the power amplifier(s) to provide both pre-equalization and crossover facilities, plus enhanced subsonic protection and hum-rejection.

Variable crossover on the switchable Subwoofer OutputSubwoofer outputs features user variable 90Hz to 150Hz crossover frequency controls. Bass frequencies destined for the full-range enclosure's woofer, which are more effectively reproduced by the subwoofer are rolled off. A two or three way system can be achieved by adding a subwoofer to your existing élite system. It also features push buttons for live/playback mode, bi-amp/full range mode and subwoofer in/out.

All processors feature balanced 1/4" TRS (XLR optional) inputs and outputs and can be used with all Yorkville subwoofers - they are even compatible with our competitor's subs! All feature a signal-to-noise ratio of better than 97dB and a max output of 8Vrms, 20dBm at 1kHz.


  • Integrated flypoints mean the E215 can be easily used in any install, touring or club rig.

  • The E215 is perfect for application in medium to large venues, especially when used with an optional EP215 processor
  • and/or élite subwoofer for extended low frequency support.

  • E215 - Black Ozite (Carpet) Finish

  • E215B - Black Ultrathane (Painted) Finish

  • Specifications

  • System Type Two : Way

  • Active or Passive: Passive

  • Program Power (Watts): 1000

  • Biampable: Yes

  • Nominal Impedance (Ohms): 4

  • Sensitivity (dB @1Watt/1m): 102

  • Max SPL (dB): 132

  • Frequency Response (Hz +/- 3db): 50 - 20k

  • Crossover Frequency (Hz): 1000

  • Driver Configuration: 2 x 15 inch / 1 inch

  • HF Horn: ABS Waveguide

  • HF Dispersion (°H x °V): 80 x 50 (Rotatable)

  • HF Protection: PTC™

  • LF Driver(s): 2 x 15 inch

  • Inputs : 1/4" Jacks 2

  • Inputs : Speakon 4-pin 2

  • Flying Hardware: 3/8-inch x 9 (All Corners)

  • Wheels: 2

  • Bar: Handles 2 Side, 1 Corner

  • Enclosure Materials: 15mm (5/8inch) 11-ply Russian Birch

  • Grille: Perforated Metal

  • Covering / Finish: Black Ozite (Carpet)

  • Optional Covering / Finishes: Black Ultrathane Paint (E215B)

  • Processor (optional): EP215

  • Dimensions (DWH xbackW, inches): 23 x 22 x 46 x 11

  • Dimensions (DWH xbackW, cm): 59 x 56 x 117 x 28

  • Weight (lbs/kg): 136 / 61.7