Yorkville EP152x The compact and efficient EP152 features a 2-inch high frequency driver mounted on an ABS Waveguide horn and a 15-inch woofer with 4-inch voice-coil. This 800 watt cabinet has a carefully chosen crossover point, seamlessly matching élite Series Processors Every élite enclosure can be used with an optional, dedicated stereo processor which is designed to optimize the performance of that specific cabinet. The 19" rack-mountable processors interface between the output of the mixer and the input of the power amplifier(s) to provide both pre-equalization and crossover facilities, plus enhanced subsonic protection and hum-rejection.

Variable crossover on the switchable Subwoofer OutputSubwoofer outputs features user variable 90Hz to 150Hz crossover frequency controls. Bass frequencies destined for the full-range enclosure's woofer, which are more effectively reproduced by the subwoofer are rolled off. A two or three way system can be achieved by adding a subwoofer to your existing élite system. It also features push buttons for live/playback mode, bi-amp/full range mode and subwoofer in/out.


  • Full Range with subwoofer
  • Bi-amp with subwoofer modes
  • XLR” inputs and outputs
  • subwoofer crossover frequency control
  • live / program music contour switch
  • APPSTM Subwoofer time alignment circuit (5ms delay)

  • Specifications

  • Specifications

  • System Type Two-Way

  • Active or Passive Passive

  • Program Power (Watts) 1400 Watts (2800 Peak / 700 Continuous)

  • Biampable Yes

  • Nominal Impedance (Ohms) 8

  • Sensitivity (dB @1Watt/1m) 98

  • Max SPL (dB) 132dB Peak (129dB Continuous)

  • Frequency Response (Hz +/- 3dB) 50 - 16k

  • Crossover Frequency (Hz) 1200

  • Driver Configuration 15-inch / 1.5-inch

  • HF Driver(s) 3-inch Titanium Driver / 1.5-inch throat

  • HF Horn Rotatable ABS Waveguide (2-inch Throat)

  • HF Dispersion (°H x °V) 80 x 50 (Rotatable)

  • HF Protection PTC™

  • LF Driver(s) 15-inch / 4-inch Voicecoil

  • Inputs - 1/4" Jacks 2

  • Inputs - Speakon 4-pin 2

  • Feet Yes

  • Flying Hardware 3/8-inch x 9 (All Corners)

  • Bar Handles 2

  • Pole Mount Adapter (1 3/8"-3.5cm) Yes

  • Enclosure Materials 15mm (5/8inch) 11-ply Russian Birch
  • Grille Perforated Metal
  • Covering / Finish Black Ozite (Carpet)
  • Optional Covering / Finishes Black Ultrathane Paint (E152B)
  • Processor (optional) EP152 / EP1
  • Dimensions (DWH xbackW, inches) 15.5 x 19.5 x 29 x 8
  • Dimensions (DWH xbackW, cm) 40 x 50 x 73 x 20
  • Weight (lbs/kg) 77.6 / 35.2