QSC CX302V 2-Channel 70V Power Amplifier (Free Shipping)

QSC CX302V 2-Channel 70V Power Amplifier
Manufacturer: QSC
Condition: New
Item #: CX302V
Regular price: $1,090.00
Sale price: $1,090.00
  • Free Shipping
  • Product Description

    Details

    The CX 2-channel series is a line of amplifiers designed for installation applications requiring premium sound quality and high output. Recognized by sound contractors worldwide for their reliability, CX 2-channel amplifiers feature PowerLight™ power supply technology reducing weight, eliminating AC mains hum and improving audio quality. The highly efficient power supply also draws less power and produces less heat resulting in added energy savings. CX 2-channel amplifiers also feature advanced amplifier control and monitoring via the Q-SYS™ network audio platform.

    • Up to 2400 W total output power
    • Active Inrush Limiting gently brings amplifiers on-line eliminating the need for costly AC power sequencers
    • Front-panel gain controls with 1 dB detents allow for precise level adjustment and are protected by tamper-proof security covers
    • DataPort connections enable remote control and monitoring of amplifier functions via Q-SYS™
    • Selectable clip limiters and infra-sonic filters protect loudspeakers from damage due to distortion and over-excursion.
    • DataPort, XLR-M or Block Connector Inputs and touch-proof barrier-strip outputs
    • Sleep (Standby) Mode for energy saving efficiency.
    • Transformer-less 70 volt models available (CX302V, CX602V, CX1202V)\
    Features:
     
    SPECIFICATIONS
    SPECIFICATIONS CX302 CX502 CX702 CX902 CX1102 CX302V CX602V CX1202V
      POWER PER CHANNEL, STEREO MODE, Both Channels Driven
    8Ω, 20 Hz–20 kHz, 0.05% THD 200 W 300 W 425 W 550 W 700 W - 550 W 700 W
    4Ω, 20 Hz–20 kHz, 0.05% THD 325 W 500 W 700 W 900 W 1100 W - - 1100 W
    2Ω, 1 kHz, 1% THD 600 W 800 W 1200 W 1500 W 1700 W - - -
    70V, 20 Hz–20 kHz, 0.05% THD 400 W
    with IT-42*
    - - 400 W 800 W 200 W 400 W 800 W
    70 V, 1 kHz, 0.05% THD - - - 440 W 1000 W 250 W 440 W 1000 W
    70 V, 1 kHz, 1% THD - - - 600 W 1200 W 300 W 600 W 1200 W
      POWER, BRIDGED MONO MODE
    16Ω, 20 Hz–20 kHz, 0.1% THD 400 W 600 W 850 W 1100 W 1400 W - 1100 W 1400 W
    8Ω, 20 Hz–20 kHz, 0.1% THD 700 W 1100 W 1500 W 2000 W 2200 W - - 2200 W
    4Ω, 1 kHz, 1% THD 1200 W 1600 W 2400 W 3000 W 3400 W - - -
    140 V, 20 Hz–20 kHz, 0.05% THD - - - 800 W 1600 W 400 W 800 W 1600 W
    140 V, 1 kHz, 0.05% THD - - - 880 W 2000 W 500 W 880 W 2000 W
    140 V, 1 kHz, 1% THD - - - 1200 W 2400 W 600 W 1200 W 2400 W
    Noise, 20 Hz–20 kHz -107 dB -107 dB -106 dB -106 dB -106 dB -106 dB -106 dB -106 dB
    Input Sensitivity @ 8 ohms 1.26 Vrms 1.23 Vrms 1.16 Vrms 1.17 Vrms 1.35 Vrms 1.26 Vrms 1.26 Vrms 1.26 Vrms
    Maximum Voltage Gain 30 dB 32 dB 34 dB 35 dB 35 dB 35 dB 35 dB 35 dB
    Output Circuitry Class AB+B AB+B H, 2-tier H, 2-tier H, 2-tier AB+B AB+B H, 2-tier
      ALL MODELS
    Distortion (SMPTE-IM) Less than 0.02%
    Distortion (Typical)
    20 Hz–20 kHz: 10 dB below rated power
    1.0 kHz and below: full rated power

    Less than 0.01% THD
    Less than 0.01% THD
    Frequency Response 20 Hz–20 kHz, ±0.2 dB
    Damping Factor
    Greater than 500
    Input Impedance
    6 kΩ unbalanced, 12 kΩ balanced
    Input Clipping
    10 V rms (+22 dBu)
    Cooling
    Variable-speed fan, rear-to-front air flow
    Connectors, each channel

    Input: 3-pin XLR & 3-pin detachable terminal blocks (1 each per channel)
    Output: Safety-shrouded barrier strip
    Amplifier Protection
    Full short circuit, open circuit, thermal, ultrasonic, and RF protection.
    Stable into reactive or mismatched loads.
    Load Protection
    On/off muting, DC-fault power supply shutdown
    Dimensions (HWD) inches
    3.5 x 19 x 14 / 2RU
    Dimensions (HWD) mm
    89 x 483 x 356 / 2RU
    Weight
    21 lb (9.5 kg) net
    27 lb (12.3 kg) shipping