Martin RUSH Strobe CWL (Free Shipping)

Martin RUSH Strobe CWL
Manufacturer: Martin
Condition: New
Item #: 90480110
Regular price: $600.00
Sale price: $600.00
  • Free Shipping
  • Product Description

    Martin RUSH Strobe CWL

    This bright and compact LED linear strobe utilises 99 x 3 W Cree XP-D LEDs with a reflector design that offers a traditional Xenon strobe look with a 17,000 lumen output. From a single flash to a blinder effect, the RUSH™ Strobe CWL is the perfect companion for mobile DJs, lounge bars, venues and cruise ships. 

    • 99 x Cree XP-D 3 W cold white LEDs
    • Reflector design
    • 1-25 FPS and blinder effect
    • Compact LED linear strobe
    • 17,000 lumens output
    • Color system: 99 x cold white LED
    • 87° beam angle 
    • 8 strobe macros
    Tech Specs
    Length: 505 mm (19.9 in.) Width: 140 mm (5.5 in.) Height: 226 mm (8.9 in.) Weight: 4.0 kg (8.9 lbs.)
    Dynamic Effects
    Strobe rate: 0 - 25 Hz Strobe duration: 0 - 10 ms (50 Hz supply), or 0 – 8.3 ms (60 Hz supply) Blinder effect: Continuous with auto fade Special effects: Ramp up/down, up-down, random flash, lightning, blinder, single flash
    Control and Programming
    Control options: DMX, stand-alone, master/slave, sound trigger DMX channels: 1 or 4 Setting and addressing: Control panel with LCD display Compliance: USITT DMX512/1990
    Beam angle: 87° Light source: 99 x 3 W CREE white XB-D LED Color temperature: 7000-8000 K Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under test conditions
    Color: Black Housing: Steel and aluminum Protection rating: IP 20
    Mounting points: Bracket with 13.5 mm holes Orientation: Any Location: Indoor use only, must be fastened to surface or structure Minimum distance to illuminated surfaces: 0.2 m (8 in.) Minimum distance to combustible materials: 0.1 m (4 in.) Minimum clearance around fans and vents: 0.1 m (4 in.)
    AC power in/thru: Neutrik PowerCon DMX data in/thru: 3-pin and 5-pin locking XLR
    AC power: 100-240 V nominal, 50/60 Hz Power supply unit: Diode bridge
    Typical Power and Current
    110 V, 60 Hz: 2.5 A, 250 W, PF 0.9 230 V, 50 Hz: 2.7 A, 380 W, PF 0.6 Measurements made at nominal voltage. Allow for a deviation of +/-10%. PF = Power Factor
    Cooling: Forced air (temperature regulated, low noise) Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min): 0° C (32° F)
    EU safety: EN 60598-2-17 (EN 605981-1) EU EMC: EN 55015, EN55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547 US safety: UL 1573 US EMC: 47 CFR Part 15 Class A Canadian safety: CSA 22.2 No. 166 Australia/NZ: C-Tick N4241
    CE UL C US C-Tick
    Included Items
    EU version: 1.5 m (5 ft.) power cable without mains plug, mounting bracket US version: 1.5 m (5 ft.) power cable with mains plug, mounting bracket
    Power cables, 16 A, for connection to power in chains Power input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.8 ft.): P/N 11541508 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 1.4 m (4.6 ft.): P/N 11541509 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 2.25 m (7.4 ft.): P/N 11541510 Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon connectors, 3.25 m (10.7 ft.): P/N 11541511 Power connectors Neutrik PowerCon NAC3FCA female connector for power in, cable mount, blue: P/N 05342804 Neutrik PowerCon NAC3FCB male connector for power out/thru, cable mount, light grey: P/N 05342805 DMX link DMX termination plug, 3-pin male XLR: P/N 91613017 Installation hardware Four-unit bracket for RUSH Strobe CWL: P/N 91606019 Half-coupler clamp: P/N 91602005 G-clamp: P/N 91602003
    Related Items
    RUSH™ Software Uploader 1: P/N 91611399
    Ordering Information
    RUSH™ Strobe CWL EU model in cardboard box: P/N 90480110 RUSH™ Strobe CWL US model in cardboard box: P/N 90480115