Martin VC-Grid 8x8 25 MW (Free Shipping)

Martin VC-Grid 8x8 25 MW
Manufacturer: Martin
Condition: New
Item #: 90357030
Regular price: $211.00
Sale price: $211.00
  • Free Shipping
  • Product Description

    Martin VC-Grid 8x8 25 MW

    The VC-Grid is a small, 200 x 200 mm LED video module with a 25 mm pixel pitch. Useful in creating customized LED video solutions with maximum artistic flexibility and a minimum of effort, the VC-Grid’s compact size makes it extremely suitable for integration into stage designs, set elements, creative ceilings, lobbies and much more. Used with or without a front diffuser, multiple VC-Grids can be combined in a countless variety of ways for ultimate design freedom. A combined power/data cable allows VC-Grids to be daisy-chained for easy setup and less cabling.

    • Wide range of pixel pitches to suit every application
    • Easy cabling, mapping and configuration
    • Bright and fully calibrated for optimal consistency
    • 64 individually controllable pixels
    • 4000 nits of brightness
    • High-quality 16-bit per color image processing technology
    • Pixel-level brightness and color calibration for optimal image quality
    • P3/DMX controllable (automatic protocol detection)
    • Intuitive mapping and addressing via P3 System Controller
    • Combined power/data input (single cable for power and data input)
    • Combined power/data thru (to daisy-chain multiple VC-Grids)
    • Available in RGB, cool white, medium white and warm white
    • Supported by integrated power and data processor (P3 PowerPort 1500) and simple cabling system
    • Custom designs available on request (pixel pitch and module dimensions)
    Tech Specs
    Length: 200 mm (7.9 in.) * Width: 200 mm (7.9 in.) * Height: 18 mm (0.7 in.) Weight: 140 g (0.3 lbs.) *Including 15 mm board-to-board gap
    Control and Programming
    Control options: Martin P3 System Controller™ via Martin P3 PowerPort 1500™ and/or DMX Protocol detection: Automatic Control modes: pixel and module DMX channels (RGB): 192 (pixel mode) or 3 (module mode) DMX channels (WW, MW and CW): 64 (pixel mode) or 1 (module mode) Setting and addressing: P3 System Controller or RDM-compliant controller Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color Color and intensity calibration: Pixel-level DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Via P3 System Controller
    Control/User Interface
    Device status: Multi-color visual indication Device test and reset: Pushbutton to call up local test patterns and reset device
    Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer's test conditions
    Photometric Data
    Pixels per module: 64 Color temperature, WW: 2700 K Color temperature, MW: 4000 K Color temperature, CW: 6500 K Luminous intensity, RGB, calibrated mode: 4000 Nit Luminous intensity, WW, calibrated mode: 8500 Nit Luminous intensity, MW, calibrated mode: 8500 Nit Luminous intensity, CW, calibrated mode: 8500 Nit Viewing angle: 120° x 120°
    Video Processing
    Brightness control Gamma correction and control Color temperature control Color gamut control Calibration processing Synchronization
    Base: Black FR4 circuit board Transparency through module (unmasked area): 37% Protection rating: IP20 RoHS compliant
    Orientation: Any Maximum number of VC-Grid™ 8x8 25 modules per daisy-chain: 12 Mounting: Mounting holes in module
    Power & data input: 4-pin Molex connector Power & data thru: 4-pin Molex connector
    Nominal input voltage: 48 VDC from Martin P3 PowerPort 1500™ or external PSU Peak power consumption (at full intensity, full white): 30 W Typical power consumption (with typical video content): 10 W Figures for typical video content are indicative only and will vary
    Cooling: Convection Maximum ambient temperature (Ta max.): 45° C Minimum ambient temperature (Ta min.): -20° C Peak heat dissipation (calculated, at full intensity, full white): 105 BTU/hr. Typical heat dissipation (calculated, with typical video content): 35 BTU/hr. Figures for typical video content are indicative only and will vary
    EU safety: EN 60950 EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 US safety: ANSI/UL 60950-1 Canadian safety: CSA C22.2 No. 60950-1
    CE ETL C US Intertek
    VC-Grid™/Strip™ 25 Mounting Frames, set of 10: P/N 91611370 VC-Grid™/Strip™ 25 Lens Arrays, Narrow, set of 8: P/N 91611540 Input cables Hybrid Input Adapter Cable, 4-pin male XLR to PCB, 0.25 m (0.9 ft.): P/N 11840158 Hybrid Input Adapter Cable, 5-pin m. XLR + power to 4-pin fem. XLR, 0.25 m (0.9 ft.): P/N 11840171 Hybrid Input Adapter Cable, 5-pin m. XLR + Martin IP66 PSU 240 W to 4-pin fem. XLR, 0.25 m (0.9 ft.): P/N 11840194 VC-Grid to VC-Grid link cables Hybrid Link Cable, PCB to PCB, 200 mm (7.9 in.): P/N 11840160 Hybrid Link Cable, PCB to PCB, 400 mm (15.8 in.): P/N 11840161 Hybrid Link Cable, PCB to PCB, 600 mm (23.7 in.): P/N 11840162 Hybrid Link Cable, PCB to PCB, 800 mm (31.5 in.): P/N 11840163 Hybrid Link Cable, PCB to PCB, 1000 mm (39.4 in.): P/N 11840157 Extension cables Hybrid 4-pin XLR Extension Cable, 1 m (3.3 ft.): P/N 11821016 Hybrid 4-pin XLR Extension Cable, 2.5 m (8.2 ft.): P/N 11821017 Hybrid 4-pin XLR Extension Cable, 5 m (16.4 ft.): P/N 11821018 Hybrid 4-pin XLR Extension Cable, 10 m (32.8 ft.): P/N 11821019 Hybrid 4-pin XLR Extension Cable, 25 m (82.1 ft.): P/N 11821015 Output/throughput cables Hybrid Output/Thru Cable, PCB to 4-pin fem. XLR, 0.25 m (0.9 ft.): P/N 11840159 Data Output/Thru Cable, 4-pin m. XLR to 5-pin fem. XLR, 0.25 m (0.9 ft.): P/N 11840203 Hybrid cables carry both power and data
    Related Items
    Martin P3 PowerPort 1500™: P/N 90721040 Martin P3-100™ System Controller: P/N 90721010 Martin P3-200™ System Controller: P/N 90721020 Martin P3-PC™ System Controller: P/N 90721030 Martin™ IP66 PSU 240 W external power supply unit: P/N 90760330
    Ordering Information
    VC-Grid™ 8x8 25 RGB: P/N 90357010 VC-Grid™ 8x8 25 WW: P/N 90357000 VC-Grid™ 8x8 25 MW: P/N 90357030 VC-Grid™ 8x8 25 CW: P/N 90357020