Martin Exterior PixLine 40 RGB, 1280mm, Diffuse (Free Shipping)

The Exterior PixLine 40 is a linear LED video fixture for media facades and creative installations. The Exterior PixLine 40 can be combined with a wide variety of lenses and diffusers for the right look for every application. The Exterior PixLine 40 is driven by the Martin P3 System Controller family for easy setup and video display, and it is also backwards compatible with DMX. The fixtures can be fully customized in terms of length and color to match every installation requirement, while the power source is hidden.

• Wide range of pixel pitch, lens and diffuser options for the flexibility of look
• Fully outdoor-rated and customizable in terms of length and color
• Easy setup and cabling for clean installation

• 40 mm pixel pitch
• 62 cd per meter calibrated
• 40 lumen per foot calibrated
• High-quality 16-bit per color image processing technology
• Pixel-level brightness and color calibration for optimal image quality
• P3/DMX controllable (automatic protocol detection)
• Intuitive mapping and addressing via P3 System Controller
• Combined power/data input (single cable for power and data input)
• Supported by integrated power and data processor (P3 PowerPort 1500 or P3 PowerPort 1000 IP) and simple cabling system
• Available in standard length of 1280 mm and 320 mm (customized lengths also available)

Physical
Length: Available in 310 mm and 1270 mm length versions* *Fixtures must be installed with a 10 mm gap to allow for thermal expansion Custom lengths are available to special order on project basis as follows: Minimum custom length: 320 mm (12.6 in.) Maximum custom length: 2000 mm (78.8 in.) Custom length increments: 40 mm (1.6 in.) NB: To allow for thermal expansion, fixtures are 10 mm shorter than the nominal lengths given above Width: 27 mm (1.1 in.) Height with flat diffuser / clear front: 32 mm (1.3 in.) Height with flat diffuser / clear front in mounting profile: 74 mm (3.0 in.) Height with asymmetric wallwasher lens: 42 mm (1.7 in.) Height with asymmetric wallwasher lens in mounting profile: 84 mm (3.4 in.) Height with round diffuser: 42 mm (1.7 in.) Height with round diffuser in mounting profile: 84 mm (3.4 in.) Weight: 1.2 kg / m (0.9 lbs. per foot)
Control and Programming
Control options: Martin P3™ System Controller via Martin P3™ PowerPort 1500 / Martin P3™ PowerPort 1000 IP, and/or DMX Protocol detection: Automatic Control modes: RGB, basic, segment and pixel-level Setting and addressing: Martin P3™ System Controller or RDM-compliant controller Control resolution: 16-bit (P3) or 8-bit (DMX) control of each color Color and intensity calibration: Pixel-level DMX compliance: USITT DMX512-A RDM compliance: ANSI/ESTA E1.20 Firmware update: Via Martin P3™ System Controller DMX channels: 3/10/13/31/31/103
Control/User Interface
Device status: Multi-color visual indication Device test and reset: Magnetic pushbutton to call up local test patterns and reset device
Optics
Options Clear Front Flat Diffuser Round Diffuser Square Diffuser Linear Asymmetric Lens Minimum LED lifetime: 50 000 hours (to >70% luminous output)* *Figure obtained under manufacturer’s test conditions
Photometric Data
Color resolution: 16 bits per color (48 bit per pixel) Viewing angle: 120° x 120° Pixels per meter: 25 Pitch (pixel center-to-center): 40.00 mm Luminous intensity, calibrated mode: 62 cd per meter* Total output, calibrated mode: 187 lumens per meter* Total output, calibrated mode: 2 083 nits (modules spaced 30 mm center-to-center)* *Preliminary data, figures are approximate
Video Processing
Brightness control Gamma correction and control Color temperature control Color space control Calibration processing Synchronization
Signal Protocol
P3 (via Martin P3™ PowerPort) or DMX
Construction
Base: Extruded aluminum profile Color: Clear anodized (customized colors available on project basis) Protection rating: IP66 Impact resistance: IK05 RoHS compliant
Installation
Orientation: Any Mounting: Slot for locking nuts on back of profile (M6) and/or installation mounting profile
Connections
Power and data input: 6-pin custom (BBD) IP66-rated Power and data thru: 6-pin custom (BBD) IP66-rated Hot plugging compatible
Electrical
Nominal input voltage: 48 VDC +/- 4% Power supply options: Martin P3™ PowerPort 1500, Martin P3™ PowerPort 1000 IP or generic 48 VDC PSU Max. total power consumption: 8.5 W per meter (at max. intensity, full white)
Thermal
Cooling: Convection Maximum ambient temperature (Ta max.): 55° C (131° F) Minimum ambient temperature (Ta min.): -20° C (-4° F) Total heat dissipation (calculated, +/- 10%): 30 BTU/hr per meter
Approvals
EU safety: EN 60950-1, EN 60950-22 EU EMC: EN 55022, EN 55024, EN 61000-3-2, EN 61000-3-3 US safety: UL 60950-1, UL 60950-22 US EMC: FCC Part 15 Class A Canadian safety: CSA C22.2 No. 60950-1, No. 60950-22 Canadian EMC: ICES-003 Class A Australia/NZ: RCM
CE ETL C US Intertek Aus
Accessories
Magnetic Test Tool, set of 10: P/N 61610139 Mounting hardware Exterior PixLine™ 40 Mounting Profile, 310 mm (12.2 in.), aluminum: P/N 91611700 Exterior PixLine™ 40 Mounting Profile, 1270 mm (50.0 in.), aluminum: P/N 91611710 Exterior PixLine™ Mounting Profile Locks, set of 10: P/N 91611725 Cables Power + Data Input Cable, 4-pin male XLR (for P3 PowerPort 1500) to fem. BBD, 0.25 m (0.9 ft.): P/N 11840257 Power + Data Input Cable, 5-pin male XLR + wire tails (for PSU) to female BBD, 0.25 m (0.9 ft.): P/N 11840276 Power + Data Input Cable, 5-pin male XLR + male Tripix IP66 PSU to fem. BBD, 0.25 m (0.9 ft.): P/N 11840275 Power + Data Extension Cable, Installation type CMX, BBD-BBD 1 m (3.3 ft.): P/N 11840270 Power + Data Extension Cable, Installation type CMX, BBD-BBD, 2.5 m (8.2 ft.): P/N 11840271 Power + Data Extension Cable, Installation type CMX, BBD-BBD, 5 m (16.4 ft.): P/N 11840272 Power + Data Extension Cable, Installation type CMX, BBD-BBD, 10 m (32.9 ft.): P/N 11840273 Power + Data Extension Cable, Installation type CMX, BBD-BBD, 25 m (82.1 ft.): P/N 11840274 Power + Data Extension Cable, Installation type CMX, without connectors, 100 m (328.1 ft.): P/N 11840278 Blanking caps for unused female BBD connectors, set of 10: P/N 62409876 DMX Leadout Adapter, male BBD to 5-pin female XLR, 0.25 m (0.9 ft.): P/N 11840258 Connectors Power + Data Cable Connector, BBD, male: P/N 91611750 Power + Data Cable Connector, BBD, female: P/N 91611751
Related Items
Martin P3™ PowerPort 1500: P/N 90721040 Martin P3™ PowerPort 1000 IP Installation: P/N 90721080 Martin™ IP66 PSU 240 W external power supply unit: P/N 90760330 Martin P3-050™ System Controller: P/N 90721090 Martin P3-100™ System Controller: P/N 90721010 Martin P3-150™ System Controller: P/N 90721015 Martin P3-200™ System Controller: P/N 90721020 Martin P3-300™ System Controller: P/N 90721060 Martin P3-PC™ System Controller: P/N 90721030
Ordering Information
Exterior PixLine™ 40 Exterior PixLine™ 40 RGB, 310 mm, Clear Front, Aluminum: P/N 90356775 Exterior PixLine™ 40 RGB, 1270 mm, Clear Front, Aluminum: P/N 90356770 Exterior PixLine™ 40 RGB, 310 mm, Diffuser Front, Aluminum: P/N 90356765 Exterior PixLine™ 40 RGB, 1270 mm, Diffuser Front, Aluminum: P/N 90356760 Exterior PixLine™ 40 RGB, 310 mm, Round Diffuser Front, Aluminum: P/N 90356755 Exterior PixLine™ 40 RGB, 1270 mm, Round Diffuser Front, Aluminum: P/N 90356750 Exterior PixLine™ 40 RGB, 310 mm, Square Diffuser Front, Aluminum: P/N 90356745 Exterior PixLine™ 40 RGB, 1270 mm, Square Diffuser Front, Aluminum: P/N 90356740 Exterior PixLine™ 40 RGB, 310 mm, Asymmetric Lens Left, Aluminum: P/N 90356735 Exterior PixLine™ 40 RGB, 1270 mm, Asymmetric Lens Left, Aluminum: P/N 90356730 Exterior PixLine™ 40 RGB, 310 mm, Asymmetric Lens Right, Aluminum: P/N 90356725 Exterior PixLine™ 40 RGB, 1270 mm, Asymmetric Lens Right, Aluminum: P/N 90356720 For asymmetric lens models, Left or Right = direction of light output when looking from male to female connector