CAD AUDIO C195 Cardioid Condenser Microphone (no switch) - with 15' XLR-M to XLR-F Cable (Free Shipping)

CAD AUDIO C195 Cardioid Condenser Microphone (no switch) - with 15' XLR-M to XLR-F Cable
Manufacturer: CAD AUDIO
Condition: New
Item #: C195
Regular price: $129.00
Sale price: $99.00
  • Free Shipping
  • Product Description

    The CAD C195 is a superior low-noise, electret condenser cardioid microphone
    designed for professional vocalists and musicians. The CAD C195 provides the
    performance and features to satisfy today's most demanding professionals.
    The wide and flat frequency response of the CAD C195 provides unsurpassed
    natural transparent sound quality. The cardioid pickup pattern minimizes annoying
    feedback (when used close to sound reinforcement speakers and monitors) and
    reduces the pickup of unwanted off-axis sounds. A transformerless electronic
    design provides optimum low frequency response and low distortion. An effective
    internal multistage pop filter minimizes wind and breath noise.
    The CAD C195 has a Flex-FormTM hardened steel grille screen that dramatically
    resists deformation while greatly reducing any risk of adverse performance caused
    by a bent or dented ball screen. This unique ability to retain its original shape
    assures that the CAD C195 will maintain its attractive appearance.
    The CAD C195 features the CAD exclusive (I.N.R.-3TM) Impact Noise Rejection
    system. Our proprietary rubber shock mount isolates the transducer from the barrel,
    thus dramatically reducing cable, stand and handling noise. The need for any external
    shock mounting device is virtually eliminated.
    The low-frequency response of the CAD C195 may be enhanced by increasing
    or decreasing the distance from the sound source. This phenomenon is technically
    known as “proximity effect”. Nominal or “flat” response is generated at a distance
    of 24 inches or more. However, as the distance to the sound source decreases,
    the bass sensitivity increases, providing a solid, robust character.
    The CAD C195 is supplied complete with a zippered vinyl protective pouch and
    a snap-in microphone swivel-mount.

    Generating Element: Electret condenser (Phantom Powered)
    Polar Pattern: Unidirectional (Cardioid)
    Frequency Response: 50 Hz - 18 kHz
    Output Level: Open Circuit
    Voltage: -55 dB (0 dB = 1 volt per microbar)
    Impedance @ 1 kHz: 500 ohms
    Dynamic Range: 110 dB
    Equivalent Noise Level: Less than 22 dB, A weighted
    Maximum SPL: 132 dB (1% THD, open circuit)
    Supply Voltage: 9 - 52 Vdc, positive pins 2 & 3 reverse polarity protected
    Current Required: Less than 5 mA over operating voltage range
    Phasing: Positive pressure on diaphragm generates a positive voltage on pin 2 relative to pin 3
    Grille Screen: Hardened Steel Mesh
    Case: Steel and die cast zinc alloy
    Finish: Durable soft feel, non-slip, titanium gray body, midnight black screen